The precaution of using the electromagnetic heater
2022-01-07
1. （electromagnetic heater)The main machine shall be dedusted regularly, usually once a month, and can be dedusted with soft brush or high-pressure air gun to ensure a good ventilation environment inside the instrument.
2. （electromagnetic heater)If the service environment is a place with corrosive gas, it must be sprayed with insulating varnish. Or use other insulating and anticorrosive materials.
3. (electromagnetic heater)The air temperature shall not be higher than 50 ℃
Inductance is only one of the application parameters. Specifically, the working frequency and current shall be measured, and the power shall be matched by increasing or decreasing the number of coil turns
2. （electromagnetic heater)If the service environment is a place with corrosive gas, it must be sprayed with insulating varnish. Or use other insulating and anticorrosive materials.
3. (electromagnetic heater)The air temperature shall not be higher than 50 ℃
Inductance is only one of the application parameters. Specifically, the working frequency and current shall be measured, and the power shall be matched by increasing or decreasing the number of coil turns
