How to take good care of the electromagnetic heater
2022-01-14
The quality of products also has a great relationship. If the electromagnetic heater has been installed according to the parameters in the manual and there is little dust in the workshop, it still often fails, then this is a quality problem. It is not ruled out that some manufacturers use cheap components to reduce costs, resulting in frequent failures due to unstable product quality. Another reason is that although the components used are good, unreasonable circuit board design will also lead to failures. If it is caused by quality problems, it is recommended to change another one.
Degree of care for electromagnetic heater. For users with large dust in the workshop, brush the fan on the electromagnetic heater and the dust on the electromagnetic heating coil regularly with a brush. There is no need to press or cut the coil with heavy objects, and do not often splash water on the coil or electromagnetic induction heater. Don't expose the electromagnetic heater to the outdoor environment, because if it rains in the outdoor environment, it will get wet, and it will break down if it is turned on before it is dry. Or there is more rain and dew in the open air in the morning, resulting in the humidity of the circuit board. When the circuit board is turned on before it is dry, it will also lead to the short circuit of the circuit inside.
Degree of care for electromagnetic heater. For users with large dust in the workshop, brush the fan on the electromagnetic heater and the dust on the electromagnetic heating coil regularly with a brush. There is no need to press or cut the coil with heavy objects, and do not often splash water on the coil or electromagnetic induction heater. Don't expose the electromagnetic heater to the outdoor environment, because if it rains in the outdoor environment, it will get wet, and it will break down if it is turned on before it is dry. Or there is more rain and dew in the open air in the morning, resulting in the humidity of the circuit board. When the circuit board is turned on before it is dry, it will also lead to the short circuit of the circuit inside.
