What is the advantage of industrial use of electromagnetic heaters?
2022-02-14
In recent years, China's smog weather has been deepening, especially in northern regions, such as Beijing, often haze weather. This seriously threatens people's health and bring a range of wear. Some experts believe that this is related to industrial pollution emissions, and the state also issues a series of provisions to stipulate industrial emissions. This also attracted major companies to find more suitable equipment to replace vintage burning coal, oil and other industrial fresses! Electromagnetic induction heating equipment stands out with its unique advantage.
Industrial electromagnetic heaters have good energy saving effect, high efficiency: Since the induction coil is not directly in direct contact with the heated metal, the heat loss is small. Energy is transmitted by electromagnetic induction, which reduces the loss of heat transfer and air heat convection compared to the resistive wire heating method, and the thermal efficiency is high, more than 85%, and it is 2 to 3 times higher than the heating method of the resistance wire. Compared with the heating of the electric resistance, the power saving is 30% or more, up to 75%.
Industrial electromagnetic heaters have good energy saving effect, high efficiency: Since the induction coil is not directly in direct contact with the heated metal, the heat loss is small. Energy is transmitted by electromagnetic induction, which reduces the loss of heat transfer and air heat convection compared to the resistive wire heating method, and the thermal efficiency is high, more than 85%, and it is 2 to 3 times higher than the heating method of the resistance wire. Compared with the heating of the electric resistance, the power saving is 30% or more, up to 75%.
Industrial electromagnetic heaters are rapid: Since the resistance of the cartridge metal shell is small, the heat efficiency is high, the smaller induction electric potential can produce a strong eddy current. Thereby, a large amount of Joule is produced in the metal. At the same time, due to the loss of heat loss, the melt in the cartridge is fast.
